Browse all practice questions for the Ultrasound Physics Test 1 Practice. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Ultrasound Physics Test 1 Practice course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which imaging mode provides velocity and direction information?
  • Why do cystic structures show posterior enhancement?
  • An echo returns after 130 μs in tissue; what is the depth of the reflector?
  • What is the wavelength in soft tissue for an ultrasound transducer operating at 5 MHz if the speed of sound is approximately 1540 m/s?
  • Doppler shift equation for velocity along the beam?
  • Pulse duration is defined as what?
  • What is the main trade-off when moving from 2D to 3D/4D imaging regarding sampling and frame rate?
  • Which tissue property leads to posterior enhancement behind a structure?
  • What is the formula for pulse duration?
  • Which Doppler modality displays velocity information over a region rather than a single depth?
  • For a linear array with aperture D and wavelength λ, which expression approximates the near-field distance N?
  • Compare pulsed-wave (PW) and continuous-wave (CW) Doppler in terms of depth specificity and velocity measurement capability.
  • If frequency decreases, the wavelength:
  • Name two common strategies to mitigate Doppler aliasing in PW Doppler.
  • State the general Doppler equation used in ultrasound for the Doppler shift fD given transmitter frequency f0, target velocity v, incidence angle θ, and tissue speed c.
  • In sector-based ultrasound imaging, how does increasing sector width affect frame rate?
  • Hertz is defined as what?
  • Near field length formula for a circular-aperture transducer with diameter D and wavelength λ?
  • Which statement best differentiates A-mode from B-mode imaging and includes a typical clinical application for each?
  • What is the purpose of damping in a transducer?
  • SPTA stands for?
  • Name the three acoustic variables.
  • The typical speed of sound in bone is approximately:
  • Which combination represents Spatial Peak, Temporal Peak?
  • Why should the Doppler angle be kept near 0 or 180 degrees for velocity measurements?
  • What do TI and MI indicate in ultrasound safety?
  • Which expression correctly defines the wavelength λ given the speed of sound c and frequency f?
  • Which range is audible to humans?
  • In tissue harmonic imaging, which signal is detected and at what frequency relative to the transmitted frequency?
  • What is refraction in ultrasound and how can it create artifacts?
  • Under what condition can total internal reflection occur in ultrasound, and what would be observed at the interface?
  • Which statement best describes the function of time gain compensation in ultrasonography?
  • Which statement distinguishes Color Doppler from Power Doppler?
  • Which statement about power in ultrasound is true?
  • For transcranial Doppler imaging requiring deep penetration through the skull, which frequency range is typically used and why?
  • Which method can help reduce aliasing when depth resolution is not required?
  • What is a consequence of using a lower-frequency transducer for deep tissue imaging?
  • What happens to bandwidth when damping is increased?
  • Using α ≈ 0.5 dB/(cm·MHz), what is the approximate attenuation in dB for 6 cm depth at 3 MHz?
  • Which ultrasound display shows amplitude as a function of depth in one dimension (often used in ophthalmology)?
  • What happens to attenuation as frequency increases?
  • What effect does increasing duty factor have on energy deposition and heating risk?
  • List two imaging advantages of tissue harmonic imaging compared to fundamental frequency imaging.
  • What causes the speckle pattern seen in ultrasound images?
  • In a medium where the speed of sound is 1540 m/s, what is the wavelength at 2 MHz?
  • What is the primary difference between color Doppler imaging and spectral Doppler?
  • What is ultrasound speckle, and why can it sometimes be used advantageously in tissue characterization?
  • Which range is infrasonic?
  • In spectral Doppler, flow toward the transducer is indicated by which velocity sign relative to the baseline?
  • In ultrasound array transducers, what does pitch refer to?
  • Distinguish side lobes from speckle and explain their impact on image quality.
  • What is the definition of period in ultrasound wave terminology?
  • Why do mirror image artifacts occur and when are they common?
  • How does dynamic focusing affect lateral resolution?
  • If Z1=1.6 MRayl and Z2=5 MRayl, approximately what percent of the incident energy is reflected at normal incidence?
  • Higher frequency has what effect on wavelength?
  • Dynamic focusing provides what benefit to image quality?
  • Tissue harmonic imaging helps reduce near-field clutter and improve angular resolution by which mechanism?
  • How does the incidence angle θ affect the Doppler shift in the Doppler equation?
  • SPL is inversely proportional to which variable?
  • In ultrasound imaging, which parameter primarily determines depth calibration and time-of-flight calculations in soft tissue?
  • Which factor causes near-field length to scale with the square of the transducer diameter, assuming wavelength is constant?
  • Define thermal index (TI) and its clinical purpose.
  • What are the common units for attenuation in ultrasound?
  • What is the purpose of the matching layer in an ultrasound transducer?
  • What capability may be available when using 3D ultrasound imaging to display a volume in real time?
  • How does increasing line density affect frame rate in 2D ultrasound?
  • Define the Q factor and its relation to bandwidth.
  • Which tissue feature typically produces specular scattering in ultrasound imaging?
  • Which factors affect frame rate in 2D ultrasound?
  • For a linear array with aperture D, the near-field distance N increases with D^2; which of the following statements is true?
  • Which imaging mode yields a two-dimensional grayscale image representing reflectivity versus depth?
  • Which statement correctly describes the relation between density and propagation speed?
  • Destructive interference occurs when the resultant wave is:
  • Which statement about intensity ranges is true?
  • Give typical speeds of sound for fat and bone and explain how these differences affect propagation.
  • Duty factor is defined as the ratio of what?
  • In continuous wave Doppler, the duty factor can reach which maximum value?
  • What is the velocity of sound in human soft tissue at 37°C (approximately)?
  • If the speed of sound in tissue is 1540 m/s and the frequency doubles, what happens to the wavelength?
  • How does attenuation in bone compare to soft tissue for the same frequency?
  • If the speeds of two media are identical, which statement is true?
  • Spectral Doppler aliasing occurs when which condition is met?
  • State Snell's law for ultrasound refraction and define the variables.
  • Which statement describes a characteristic of A-mode imaging?
  • Temporal intensities order largest to smallest according to the provided ordering?
  • Why is coupling gel used in ultrasound and what properties should it have?
  • To improve axial resolution, which statement is most accurate?
  • Which frequency ranges classify ultrasound, audible sound, and infrasound?
  • SPL is defined as the product of the number of cycles in the pulse and which parameter?
  • Which expression correctly defines the reflection coefficient at normal incidence between two media with impedances Z1 and Z2?
  • To improve penetration, which choice would you make regarding transmitted frequency?
  • Which expression correctly defines acoustic impedance?
  • If a 5.0 MHz transducer operates in soft tissue (c ≈ 1540 m/s), what is the wavelength of the ultrasound wave in tissue?
  • The typical speed of sound in fat is approximately:
  • In color Doppler displays, which color convention is commonly used to represent flow toward the transducer, and how is direction encoded in spectral Doppler?
  • How does transducer bandwidth relate to axial resolution and damping?
  • What is Fraunhofer zone also known as, and what region does it describe?
  • Describe the trade-off between transducer frequency, penetration depth, and axial resolution.
  • SPL is directly proportional to which factor?
  • A linear array with element spacing of 0.6 λ is likely to exhibit which artifact, and how can you mitigate it?
  • How does adjusting the focal depth influence the lateral resolution across the image?
  • What is the typical frequency range for diagnostic ultrasound?
  • Which unit is used for intensity?
  • What does B-mode imaging generate?
  • In ultrasound imaging, which mode is best for tracking motion along a single line, such as cardiac walls?
  • What type of waves are ultrasound in tissue?
  • Period is inversely related to which property?
  • At normal incidence, is the reflection strong or weak when the incident medium impedance is 1.5 MRayl and the second medium impedance is 1.6 MRayl?
  • Constructive interference occurs when peaks align with peaks and troughs align with troughs. This results in:
  • What is the wavelength (in millimeters) of a 5 MHz ultrasound wave?
  • What is spatial-peak temporal-average intensity (SPTA) and why is it important?
  • Which statement accurately contrasts color Doppler and power Doppler in terms of velocity sensitivity and directional information?
  • Which property has the greatest influence on the speed of sound in a medium?
  • Which expression correctly represents the axial resolution AR in terms of the pulse count n, the speed of sound c, and the transmit frequency f?
  • For pulsed-wave Doppler with PRF = 12 kHz, f0 = 5 MHz, θ = 60°, find the maximum measurable velocity without aliasing (assume c = 1540 m/s).
  • Lateral resolution is improved by focusing and higher frequency; it is determined by which beam property?
  • If frequency doubles, the wavelength will:
  • What is the approximate speed of sound in soft tissue, and what does this value influence in ultrasound imaging?
  • How does backing (damping) material influence pulse duration and bandwidth?
  • Pulse repetition period (PRP) is defined as what?
  • Speed and wavelength are related how in a given medium?
  • Which tissue feature typically produces Rayleigh scattering in ultrasound imaging?
  • What distance does sound cover in one microsecond if its speed is 1.54 mm/µs?
  • With f0 = 5 MHz, c = 1540 m/s, θ = 60°, and target velocity v = 0.5 m/s, what is the Doppler frequency shift fD?
  • Which statement best describes the difference between specular and Rayleigh scattering in tissue, and what is a typical ultrasound example of each?
  • How does increasing the number of cycles in a pulse affect SPL and axial resolution?
  • When depth resolution is not required, which Doppler modality can be used to avoid aliasing entirely?
  • In a medium where velocity is constant, how are wavelength and frequency related?
  • What is the Fresnel (near) zone in ultrasound?
  • Which ultrasound display is a one-dimensional amplitude versus depth plot commonly used in ophthalmology?
  • Axial resolution example: If SPL is 1.2 mm, what is the axial resolution approximately?
  • In ultrasound safety indices, what is the difference between SPTA and SPPA?
  • If two media have identical impedances, what happens to reflections?
  • Which two characteristics affect the speed of sound in a medium?
  • Why does deeper ultrasound require higher transmit power or longer acquisition?
  • What is the duty factor in ultrasound?
  • What is the wavelength for a 1 MHz ultrasound wave?
  • What is the wavelength at 0.5 MHz given a speed of sound of 1540 m/s?
  • How does transducer frequency affect resolution and penetration?
  • How long is the round-trip travel time to a reflector 20 cm deep in tissue?
  • In the impedance reflection calculation, what unit is used for acoustic impedance?
  • Which Doppler modality samples velocity along a line at a specific depth?
  • The AR formula AR ≈ (n × c) / (2f) shows AR is directly proportional to which variables?
  • What is dynamic range in ultrasound imaging, and how does it affect image contrast?
  • In sector-based imaging, what happens to the number of scan lines when sector width increases?
  • What type of wave is sound?
  • Intensity is determined by what?
  • What is peak pressure or height of a wave known as?
  • What is the fundamental relationship between speed, frequency, and wavelength in ultrasound?
  • With a pulse duration of 6 μs and PRF of 1 kHz, what is the duty cycle?
  • Which statement describes the relationship among amplitude, power, and intensity?
  • For a 3.5 MHz transducer in tissue (c ≈ 1540 m/s) with a single-cycle pulse, what is the approximate axial resolution?
  • If the center frequency is 5 MHz and bandwidth is 2 MHz, the quality factor Q is approximately what value?
  • Which property does wavelength influence most directly in axial resolution?
  • How does depth affect dynamic range and SNR in ultrasound imaging?
  • Name a technique to reduce speckle in ultrasound images?
  • What is the effect of using a smaller pitch in an array?
  • Which statement about axial resolution is true?
  • If the transducer frequency doubles from 5 MHz to 10 MHz while other parameters unchanged, what happens to the Doppler frequency shift for the same v and c?
  • Spatial Pulse Length is determined by which factors?
  • Lateral resolution is primarily determined by which beam property across the scan plane, and can be improved by focusing and higher frequency?
  • Why are phantoms used in ultrasound quality assurance?
  • What are the units of Spatial Pulse Length as given?
  • Not an acoustic variable?
  • What is the principle of tissue harmonic imaging and why does it improve resolution and reduce near-field artifacts?
  • What is the definition of period in wave terminology?
  • Which acronym means Spatial Peak Pulse Average?
  • Axial resolution is approximately SPL/2. Which factor primarily determines axial resolution?
  • Which equation relates speed, frequency, and wavelength?
  • A Doppler sample volume defines the depth interval from which signals are sampled. How does increasing the sample volume length affect velocity measurement accuracy?
  • When two waves are in-phase at a point, what is typically observed in the resultant wave?
  • Define pulse repetition period (PRP) and its relationship to pulse repetition frequency (PRF) and Doppler measurement.
  • What is the typical power range for ultrasound beams?
  • What is one trade-off of using a higher transmitted frequency?
  • What causes grating lobes in array transducers and how can they be minimized?
  • What is the difference in range resolution between pulsed wave and continuous wave Doppler?
  • Which arrangement correctly classifies 16 kHz and 20 kHz frequencies?
  • Why are curved array transducers commonly used for abdominal imaging?
  • Using an attenuation coefficient of about 0.5 dB/cm/MHz, what is the total attenuation in decibels for 3 cm depth at 2 MHz?
  • What does M-mode show?
  • Which technique directly reduces Doppler aliasing by increasing the pulse repetition frequency?
  • Why do calcifications or bones create shadowing?
  • To avoid grating lobe artifacts in a linear array, what is the typical maximum element spacing relative to wavelength?
  • How does frame rate relate to depth and number of scan lines per frame? If PRF = 15 kHz and 120 scan lines are used per frame, what is the frame rate?
  • If an echo is received after 51.9 μs in tissue with c ≈ 1540 m/s, what is the reflector depth?
  • Out-of-phase waves can produce destructive interference. What happens to the resultant amplitude?
  • What is the general principle behind 3D ultrasound imaging?
  • Define mechanical index (MI) and describe how it scales with peak negative pressure and frequency.
  • Power Doppler compared to Color Doppler: which statement is true?
  • What technique enables focusing at multiple depths and across the beam, and how does it affect image quality?
  • Under which conditions does refraction occur?
  • Pulse duration PD equals n × T, with T = 1/f. If a transducer emits 4 cycles at a center frequency of 3 MHz, what is the pulse duration?
  • What is the commonly cited average speed of sound in soft tissue in millimeters per microsecond?
  • When switching from 2D to 3D imaging, how is frame rate typically affected?
  • Which statement correctly describes in-phase waves?
  • Which expression correctly gives the reflection coefficient magnitude between two media with impedances Z1 and Z2?
  • If power increases, what happens to amplitude and intensity?
  • Frame persistence (temporal averaging) affects speckle and motion perception how?
  • What determines lateral resolution in ultrasound imaging, and what is the typical focal-zone value if the beam width is 0.6 mm?
  • Spatial pulse length SPL is defined as n × λ. If the pulse contains 6 cycles and the wavelength is 0.3 mm, what is the SPL?
  • Approximately how long is the round-trip travel time for 1 cm depth in soft tissue?
  • What type of wave is sound?
  • What is the commonly used average speed of sound in soft tissue for diagnostic ultrasound?
  • Which statement best describes the constraint on increasing PRF in practice?
  • Tissue harmonic imaging improves angular resolution by what mechanism?
  • Which of the following pairs correctly match the acoustic variable with its unit?
  • How is the duty factor defined?
  • What is energy per unit area of sound called?
  • The fraction of incident ultrasound intensity reflected at an interface with Z1 = 1.60 MRayls and Z2 = 1.70 MRayls is?
  • What is the effect of constructive interference on the amplitude of the resultant wave?
  • What is speckle and why does it occur?
  • In Doppler imaging, which modality provides high sensitivity to low-velocity flow but does not show directional information?
  • If two waves of equal amplitude are perfectly out of phase, the resultant amplitude is:
  • Which description defines grating lobes and a typical method to reduce them?
  • Which processes contribute to attenuation?
  • What is the definition of intensity in ultrasound physics?
  • What is a phased-array transducer and how does it steer the beam?
  • Using the soft tissue rule (1.54 mm divided by frequency in MHz), what is the wavelength at 2 MHz?
  • What is the speed of sound in soft tissue?
  • How is amplitude measured?
  • What characterizes out-of-phase waves?
  • Wavelength is true about what statement?
  • How does increasing transmitted frequency f0 affect the Doppler shift magnitude for fixed velocity and angle?
  • If the number of cycles is fixed and the ultrasound frequency increases, pulse duration
  • To reduce aliasing in Doppler ultrasound, which strategy increases the pulsed repetition frequency (PRF)?
  • Which of the following best describes acoustic impedance?
  • Which statement about the axial resolution formula AR ≈ (n × c) / (2f) is true?
  • Density is defined as what?
  • Attenuation is determined by which factors?
  • Which statement best describes the units used in the wavelength formula for ultrasound?
  • If peak negative pressure remains constant but frequency is increased, how does the mechanical index change?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy